Mercedes S-Class W-220

since 1998 release

Repair and operation of the car



Mercedes W220
+ Mercedes-Benz cars of the class S (W220)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Automatic transmission
+ Power shafts
- Brake system
   Specifications
   Arrangement of components of the amplifier of emergency brake application of BAS
   Arrangement of components of the ESP system
   Dual main brake cylinder
   Vacuum amplifier
   Brake support
   Check of thickness of a brake disk and overlays of brake shoes
   Removal and installation of brake shoes
   Removal and installation of a forward cable of the drive of the parking brake
   Adjustment of the parking brake
   System of anti-blocking of brakes of ABS, antistrange system - an arrangement of elements
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment






Adjustment of the parking brake

 PERFORMANCE ORDER

1. Lift a back part of the car.
2. Turn off on one bolt on each back wheel.

3. By means of the screw-driver (4.5 mm), turn an adjusting castor 105 so that brake shoes blocked a wheel

4. Turn an adjusting castor 105 back so that the wheel could rotate freely (approximately on 5 - 6 teeths).
5. Tighten the lever of the drive of the parking brake system several times.
6. Wrap bolts of fastening of wheels and lower the car.