Mercedes S-Class W-220

since 1998 release

Repair and operation of the car



Mercedes W220
+ Mercedes-Benz cars of the class S (W220)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Automatic transmission
+ Power shafts
- Brake system
   Specifications
   Arrangement of components of the amplifier of emergency brake application of BAS
   Arrangement of components of the ESP system
   Dual main brake cylinder
   Vacuum amplifier
   Brake support
   Check of thickness of a brake disk and overlays of brake shoes
   Removal and installation of brake shoes
   Removal and installation of a forward cable of the drive of the parking brake
   Adjustment of the parking brake
   System of anti-blocking of brakes of ABS, antistrange system - an arrangement of elements
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment






Brake support

Forward wheels

Removal

 PERFORMANCE ORDER

1. Remove forward wheels.

2. Disconnect a brake hose 51 from a brake tube 5 and then from a support 31.

3. Disconnect the socket of conducting 510/1x1 from the sensor of frequency of rotation of a forward wheel 810x1.
4. Unscrew the socket of conducting 510/1x1.
5. Remove the sensor of frequency of rotation of a forward wheel L6/1 if it is necessary.


Installation

 PERFORMANCE ORDER

Installation is carried out as it should be, the return to removal.


Replacement

 PERFORMANCE ORDER

1. Vypressuyte protective covers 45.

2. Insert a metal segment 040 28 mm thick into a support, then carefully to a vypressuyta pistons 47.
3. Remove pistons by means of flat-nose pliers 020.
4. Check pistons 47 and an opening in a support for absence of damage and replace them if it is necessary.
5. Remove consolidation of the 50th piston from a groove in a cylinder opening.
6. Assembly is carried out upside-down the Sizes of a brake support of a forward wheel are specified in Specifications.


Back wheels

Removal

 PERFORMANCE ORDER

1. Remove a back wheel.

2. Disconnect a brake hose 51 from a brake tube 5 and then from a support 31.

3. Disconnect the socket of conducting 810/4x1 from the sensor of wear of the right brake slip S10/4.
4. Unscrew the socket of conducting 510/4x1.
5. Turn off a brake support 31 from a wheel support.


Installation

 PERFORMANCE ORDER

Installation is carried out as it should be, the return to removal.