Mercedes S-Class W-220

since 1998 release

Repair and operation of the car



Mercedes W220
+ Mercedes-Benz cars of the class S (W220)
- Operation manual
   Main bodies and panels of management/control
   Locks, keys and locks. Smart card. Uniform lock
   Protection against theft
   Assistance to landing and exit from the car
   Seats
   Systems of safety
   Steering wheel, rear-view mirrors
   Memory of provision of a seat
   Control panel
   Multipurpose steering wheel, multiinformation display
   Switches
   Automatic conditioner of air. Ventilation. Independent heater
   Window regulators, roof hatch
   Equipment of salon
   Driving and auxiliary systems
   Precautionary and control lamps, and also messages of the multiinformation display on the registered malfunctions
   The first-aid kit, the fire extinguisher, sign of an emergency stop also cut for a spare wheel
   Features of traffic regulations of the countries of Europe
   Messages and inscriptions in foreign languages
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
+ Automatic transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment






Multipurpose steering wheel, multiinformation display


Buttons on a multipurpose steering wheel depending on a complete set of your car the call on the multiinformation display of below-mentioned systems, management by them and installation of their parameters can be made:

1. Measuring instrument of a run and counter of the general run

Active system of the prevention THAT (ASSYST)

Precautionary alarm lamp of level the engine - an oil leg

2. Sound systems

Radio receiver

CD player

Cassette tape recorder

3. Phone

4. Navigation system

5. Distronic system (DTR)

6. On-board computer

Since start

Since dumping

Capacity of the fuel tank

7. Memory of malfunctions

8. Individual installation

Press the button several times until the required system is displayed.

With each new pressing of the button the following system is displayed.

In some systems additional indications can be caused by pressing of the button or.

Indications on the multiinformation display, depending on installation, are made in the German, English, French, Italian or Spanish languages. (Switching to other language — address the section "Individual Installation").

Irrespective of the established language in cars with radio receivers of the systems "audio 10" or "audio 30" of indication of sound systems (the radio receiver, the CD player, the cassette tape recorder), and also indications on phone of the system "audio 30" appear in English. Indications on phone of the system "audio 10" are absent.


Turn an electronic key in the lock of ignition in situation 1 or 2.

Press the buttons:

3 following system
4 following indication on system
5 previous indication on system
6 activation or deactivation of system of voice-activated control of "Lingvatronic"
7 increase in loudness
8 reduction of loudness
9 sets of a phone number, reception of the arriving telephone conversation
10 ends of telephone conversation, refusal of reception of the arriving telephone conversation
11 sound signal on a soft cover

Press the button several times until the required system is displayed.

With each new pressing of the button the following system is displayed.

In some systems additional indications can be caused by pressing of the button or.

The measuring instrument of a run and the counter of the general run with subsystems

1. Measuring instrument of a run and counter of the general run.

Dumping of indications of the measuring instrument of a run (Section Control panel).

2. Active system of the prevention THAT (ASSYST).

3. Precautionary alarm lamp of level of motive oil.

Press the button several times until indication of the measuring instrument of a run and the counter of the general run-1-appears.

Or press the button several times until there is a required indication (2, 3, 1).

Pressing of the button displays the following system.

Sound systems

Depending on the included sound system the corresponding indication on the display appears.

Radio receiver

  1. Any sound system is not included.
  2. The radio receiver is switched on.
  3. The established strip of frequencies and, if necessary, in addition number of a cell of memory.
  4. The name of the adjusted radio station or frequency of radio station.
  5. Appears only if in the Individual Installation system it was established "MEMORY" (MEMORY), but not "FREQUENCY" (FREQUENCY).
Turning on of the radio receiver

Press the button several times until indication appears (").

Or press the button several times until the required radio station or frequency is displayed.

The button or the remembered radio station or frequency of radio station can get out. It depends on installation in the menu of the STATION SEARCH USING installation (SEARCH of RADIO STATION THROUGH) (address the subsection "Individual Installation").

Pressing of the button displays the following system.

CD player

  1. Any sound system is not included.
  2. The CD player is switched on.
  3. At a CD changer number of the urgent lost compact disk is displayed.
  4. Number of the name.
Turning on of the CD player

Press the button several times until indication-2-appears.

Or press the button several times until the required name of the piece of music-4-is displayed.

Pressing of the button displays the following system.

Cassette tape recorder

1. Any sound system is not included.
2. The cassette tape recorder is switched on.
3. The lost party.

Turning on of the cassette tape recorder

Press the button several times until indication-2-appears.

Press the button, the rewinding is made prior to the beginning of the following piece of music.

By pressing the button, rewind by the beginning of the lost piece of music is made.

Pressing of the button displays the following system.

Phone

Telephone directory

  1. Phone is switched off.
  2. Input of the PIN code (personal identification code) of the SIM card - address the corresponding Operation manual on phone.
  3. Search of the corresponding telephone network is run
  4. Phone is ready for operation. The corresponding telephone network and the name of provider is displayed.
  5. Now the car out of the range of transfer or reception.
  6. The telephone directory which is remembered on the phone card or in phone is read out. Duration is about 30 seconds.
  7. The surname chosen from the telephone directory.
  8. Number of the chosen subscriber, begins process of set of number.
  9. Process of set of number is finished, and the surname is displayed. Indication remains during all telephone conversation.
  10. Number of a cell of memory.

Turning on of phone

Press the button several times until the corresponding telephone network-4-appears. At emergence of indication-2-at first enter the PIN code — address the corresponding Operation manual on phone.

Press the button or, "browsing" of the telephone directory alphabetically forward or is made back.

If the button or is pressed more than one second, the accelerated "browsing" of the telephone directory is made. The surname of the chosen subscriber appears on the display.

If you decided not to call, press the button. Process is interrupted, and indication-4-appears.

Press the button if on the display-7-the surname of the required subscriber-7-is displayed. Phone number-8-is dialed.

If process of set of number is finished, the surname-9-is displayed. Indication-9-remains during all telephone conversation.

Press the button, telephone conversation comes to an end, indication-4-appears.

Pressing of the button displays the following system.

Repeated call of the subscriber

1. Phone is ready for operation. The corresponding telephone network and provider is displayed.
2. Number or a surname in memory of a repeated call of the subscriber.
3. Number in memory of a repeated call of the subscriber — was begun process of set of number.
4. Process a set of number is finished, and the surname of the subscriber remembered in the telephone directory or the dialed number is displayed if the surname of the subscriber is not remembered. Indication remains during all telephone conversation.
5. Number of a cell of memory, the last are remembered 10 dialed numbers.

L0 dialed by the last number, L1 to L9, the dialed previous numbers

Phone is switched on

Press the button several times until the provider-1-is displayed.

Press the button, memory of a repeated call of the subscriber is activated, and the subscriber number dialed by the last is displayed.

Press the button or, memory of a repeated call of the subscriber "is thumbed through" forward or back. The corresponding chosen number appears on the display.

If you decided not to call, press the button. Process is interrupted, and indication-1-appears.

Press the button if on the display-2-the required number or a surname of the required subscriber is displayed.

Phone number-3-is dialed.

If process of set of number is finished, the surname-4-is displayed if the surname is remembered in the telephone directory, otherwise — indication of a phone number remains. Indication remains during all telephone conversation.

Press the button, telephone conversation comes to an end, indication-1-appears.

Pressing of the button displays the following system.

The arriving call

1. "CALL" (CALL) — you are called.

Press the button and accept a call.

Press the button, the conversation comes to an end, indication with the corresponding telephone network appears.

If you do not want to accept the arrived call, press the button.

Navigation system

1. The navigation system is switched off.
2. The navigation system is switched on, but the purpose is not entered.
3. The navigation system is switched on, and maintenance of the purpose is activated.

Press the button several times until the required system is displayed.
(The navigation system — address the corresponding Operation manual on the COMMAND system (Cockpit Management and Data System).

Pressing of the button displays the following system.

Distronic system (DTR)

1. The Distronic system is switched off. The valid distance-4-and the set distance-5-to ahead the going car-3-is displayed
2. The Distronic system (DTR) is included.
3. Ahead the going car. Appears only if the going car was identified ahead.
4. The valid distance to ahead the going car.
5. The set distance to ahead the going car
6. Own car.

Press the button several times until the required system is displayed.
The Distronic system (DTR) is described in the Section Driving and auxiliary systems.

Pressing of the button displays the following system.

Traveling computer

1. "AFTER START (from the moment of START) — the counter of short distances.
2. "AFTER RESET" (from the moment of DUMPING) — the counter of long distances.
3. The remained fuel reserve with the indication of an approximate run.
4. A run in km of "AFTER START" (from the moment of START) or "AFTER RESET" (from the moment of DUMPING).
5. Time of "AFTER START" (from the moment of START) or "AFTER RESET" (from the moment of DUMPING).
6. The average speed calculated by "AFTER START" (from the moment of START) or "AFTER RESET" (from the moment of DUMPING).
7. The average fuel consumption calculated by "AFTER START" (from the moment of START) or "AFTER RESET" (from the moment of DUMPING).

Press the button several times until indication appears (1, 2 or 3).

Or press the button until there is a counter of short distances "FFTER START" (from the moment of START)-1-, the counter of long distances "AFTER RESET" (from the moment of DUMPING)-2-or indication of a reserve of fuel-3-.

Pressing of the button displays the following system.

If the on-board computer is caused repeatedly, there is always an indication chosen as the last (1, 2 or 3).

Reception of parameters from the previous motion cycle in the counter of short distances "AFTER START" (from the moment of START) blinks during passing of a distance about two kilometers, or within two minutes. In this phase parameters from the previous motion cycle can be adopted by pressing of the button R on the control panel.

Dumping of the counter of short distances of "AFTER START"-1-or counter of long distances bolts of "AFTER RESET"
(FROM THE MOMENT OF DUMPING)-2-:

The button or cause the corresponding indication (1 or 2) and the button R on the control panel press until there is a dumping on "0".

Memory of malfunctions

1. Malfunctions are absent.
2. Number of malfunctions.

Press the button several times until memory of malfunctions is displayed.

If there is an indication-2-, press the button or. After that consecutive display of faults is made. (The warning system and the alarm system of malfunctions — address the Section Precautionary and control lamps, and also messages of the multiinformation display on the registered malfunctions). Upon completion of indication of all malfunctions indication-2-appears again.

If malfunctions arose during the movement, indication-2-appears once again if the electronic key in the lock of ignition turns in situation 0 or is taken out. In this case displays of faults appear approximately for 5 seconds.

By pressing the button R on the control panel, the following indication of malfunction immediately appears.

When turning an electronic key in the ignition lock in situation 1 or 2, memory of malfunctions is cleared.

If malfunctions arose repeatedly, then they are again displayed in memory of malfunctions.

Pressing of the button displays the following system.

Malfunctions, damages and the alarm system of malfunctions are registered only certain systems and are displayed in the established volume. Indications of the warning system and the alarm system of malfunctions (The section Precautionary and control lamps, and also messages of the multiinformation display on the registered malfunctions), serve only for support and do not exempt the driver from a duty to show conscientiousness concerning ensuring operational reliability of the car.

Individual installation

  1. Basic indication of individual installation.
  2. "SET TIME HOURS" (INSTALLATION of TIME - HOURS) (only models without the COMMAND system).
  3. "SET TIME MINUTES" (INSTALLATION of TIME - MINUTES) (only models without the COMMAND system).
  4. "AUTOMATIC DOOR LOCK" (AUTOMATIC LOCKING of DOORS) (Undressed Locks, keys and locks. Smart card. Uniform lock).
  5. "HEADLAMP MODE" (SWITCHING OF LIGHT OF HEADLIGHTS) 1.
  6. "HEADLAMPS DELAYED SWITCH-OFF" (the SLOWED-DOWN SWITCHING OFF SVETA FAR) (Undressed Switches)
  7. "INT. ILLUMINATION DELAYED SWITCH-OFF" (DURATION OF AFTERGLOW OF OSVEDENIYA OF SALON).
  8. STATION SEARCH USING" (SEARCH of RADIO STATIONS THROUGH) — installation of the FREQUENCY radio receiver (FREQUENCY) — the button or gets out the frequency of "MEMORY" (MEMORY) — the button or the remembered radio station gets out.
  9. "TEMP INDICATOR" (INDICATION of TEMPERATURE) — the established value is displayed on the indicator of temperature of external air on the control panel and on the display of the automatic conditioner of air.
  10. "SPEEDOMETER" (SPEEDOMETER) — the established value is displayed on a speedometer.
  11. "TEXT" (TEXT) — installation of language of indication on the multiinformation display.
  12. "SPEED LIMIT (WINTER TYRES)" (RESTRICTION of SPEED (the TIRE WITH the WINTER DRAWING of the PROTECTOR)) 2 — the constant limiter of speed (The section Driving and auxiliary systems).
  13. Dumping of the menu of installation on factory installation.
  14. Selection marking — designates the chosen installation.

Factory installation for the Federal Republic of Germany is given in the previous flowchart.

1 Except for the countries demanding constant inclusion of light of headlights.
2 Only for the Federal Republic of Germany

Press the button several times until basic indication of the Individual Installation system-1-appears.

Or press the button several times until the required menu of installation is displayed (from 2 to 12).

In the menu of installation (1, 2) or time is determined by pressing the button, and in the menu of installation (with 4 on 12) marking of selection-14-is established.

The made installations are remembered and immediately carried out.

If all menus of installation were passed, basic indication of the Individual Installation system-1-is again displayed.

Pressing of the button displays the following system.


Installations can be made only at a stop of the car or at a small speed of the movement. At excess of the specified speed of the movement basic indication of the Individual Installation system-1-is displayed.

If after that other system is not caused, again there is before an opened menu of installation as soon as the car stopped or at a small speed of the movement.

Dumping of the menu of installation (from 4 to 12) on factory installation:

Cause basic indication of the Individual Installation system-1-.

Press the button R on the control panel about 3 seconds. There is an indication-13-.

Repeatedly press the button R. If the button R is not pressed, then approximately in 5 seconds basic indication of the Individual Installation system-1-appears. In this case menus of installation are not dropped.

Volume control

Nazhimany buttons:

increase in loudness
reduction of loudness

Loudness only of the activated or chosen system is regulated. Them are sound systems, phone, radio service of the notification about a situation on highways, a speech conclusion of the navigation system and a speech conclusion of system of voice-activated control of "Lingvatronic".

Volume control is remembered separately for each system.