Mercedes S-Class W-220

since 1998 release

Repair and operation of the car



Mercedes W220
+ Mercedes-Benz cars of the class S (W220)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
- Automatic transmission
   Problems of the block of electronic control and the operating signals
   Search of malfunctions - the general information
   Removal and the AT installation with the hydrotransformer
   The AT electrohydraulic control unit (AT is established)
   Dismantling and assembly of the electrohydraulic control unit
   Dismantling and assembly of a plate of gear shifting
   Case of transmission and hydrotransformer
   Multidisk brakes of V2, VZ and gear wheel of blocking at "Parking"
   Dismantling and assembly of a back hollow shaft with the back coupling of a free wheeling
   Removal and installation of a multidisk brake B1 and oil pump
   Dismantling and assembly of the oil pump
   Dismantling and assembly of a multidisk brake of B1
   Dismantling and assembly of a multidisk brake of B2
   Dismantling and assembly of an output shaft with the central and back block of planetary gear wheels
   Removal and installation of multidisk couplings K1, K2 and K3
   Dismantling and assembly of coupling of K1
   Dismantling and assembly of the leading shaft with coupling by K2 and the forward block of planetary gear wheels
   Dismantling and assembly of coupling of K3
   The blocking mechanism at "parking"
   Removal and installation of the lever of the selector of gear shifting
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment






Removal and installation of the lever of the selector of gear shifting

Removal and installation of the lever of the selector of gear shifting (with the regime W/S switch)

9 — Laying
40 — Bolts (4 pieces)
97 — the Intermediate lever
S16/10 — the Switch of identification of the included transfer

S16/10s2 — the Switch of lamps of a backing
Y66/1 — the Electromagnetic drive of blocking of provisions of "R/P"


Removal

 PERFORMANCE ORDER

1. Remove the switching lever from the intermediate lever 97.
2. Remove the central console.
3. Turn off bolts 40.
4. Disconnect sockets and the electromagnetic drive of blocking of provisions of "R/P" Y66/1 from the identification S16/10 switch, the switch of lamps of a backing S16/10S2.
5. Remove the gear shifting selector lever assembled from a floor.


Installation

 PERFORMANCE ORDER

Installation is carried out as it should be, the return to removal. Check for correctness of installation laying 39 and its state if it is necessary, replace it.