Mercedes S-Class W-220

since 1998 release

Repair and operation of the car



Mercedes W220
+ Mercedes-Benz cars of the class S (W220)
+ Operation manual
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Engine electric equipment
- Automatic transmission
   Problems of the block of electronic control and the operating signals
   Search of malfunctions - the general information
   Removal and the AT installation with the hydrotransformer
   The AT electrohydraulic control unit (AT is established)
   Dismantling and assembly of the electrohydraulic control unit
   Dismantling and assembly of a plate of gear shifting
   Case of transmission and hydrotransformer
   Multidisk brakes of V2, VZ and gear wheel of blocking at "Parking"
   Dismantling and assembly of a back hollow shaft with the back coupling of a free wheeling
   Removal and installation of a multidisk brake B1 and oil pump
   Dismantling and assembly of the oil pump
   Dismantling and assembly of a multidisk brake of B1
   Dismantling and assembly of a multidisk brake of B2
   Dismantling and assembly of an output shaft with the central and back block of planetary gear wheels
   Removal and installation of multidisk couplings K1, K2 and K3
   Dismantling and assembly of coupling of K1
   Dismantling and assembly of the leading shaft with coupling by K2 and the forward block of planetary gear wheels
   Dismantling and assembly of coupling of K3
   The blocking mechanism at "parking"
   Removal and installation of the lever of the selector of gear shifting
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment






Removal and the AT installation with the hydrotransformer

Automatic transmission

4 — the Drain stopper of the pallet
9 — the Drain stopper of the hydrotransformer
26 — I Will corrode conductings
33 — the gear shifting Lever
46 — the grounding Tire
49 — the Oil pipeline
61 — Maslozalivnaya a tube
62 — the Guard

63 — Draft of gear shifting
64 — the Back arm of fastening of an exhaust pipe
65 — an engine Arm with a support
66 — the Driveshaft
80 — the Cable of inclusion of blocking at the parking
81 — a hydrotransformer Cover
94 — the Exhaust pipe
95 — the Bolt


Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Pick up the maslozalivny phone 61 from the engine.
3. Turn off a drain stopper 4 of the pallet of transmission and merge gearbox oil.
4. Turn off a drain stopper 9 of the hydrotransformer and merge gearbox oil.
5. Remove a guard 62 and disconnect the 13-contact socket 26.
6. Disconnect a cable of the 80th inclusion of blocking at the parking.
7. Turn off bolts of the 95th fastening of the hydrotransformer to a drive plate. Then uncover the hydrotransformer 81.
8. Turn off the left and right oil pipelines 49 from the oil heater.
9. Remove draft of gear shifting 63, having disconnected for this purpose a clamp.
10. Remove an arm 64 fastenings of an exhaust pipe.
11. Disconnect final system 94.
12. Remove a fan casing from a radiator.
13. Turn off a back arm of the engine with a support 65.
14. Unscrew the driveshaft 66.
15. Disconnect a connection wire on "weight" 46 from transmission.
16. Turn off bolts of fastening of transmission to the block of cylinders and remove it down at an angle.
17. Remove the hydrotransformer.


Installation

 PERFORMANCE ORDER

Installation is carried out as it should be, the return to removal.